Yeti SB115 T1 Carbon Mountain Bike 2021 - Turquoise
It’s time to recalibrate your gray matter with what’s happening in racing today. All it takes is “it’s on!” – number plates not required. Born to naturally crush the climbs, the SB115 is evolved. Deft on the downs. Designed to race. Built to rally.
A LIGHTER SWITCH
Short-travel specific design of Switch Infinity, turned 90 degrees and optimized for lighter weight and efficiency.
MORE THAN ADDED TRAVEL
Crushing souls on the descent is more than half the fun. And a hell of a lot more than half the point. The SB115 has 115 genre killing millimeters of travel, that work harder than ever before.
Across our line, we have chosen a relatively flat and high anti-squat curve in beginning and mid-section of travel where pedaling commonly occurs a.k.a the pedaling zone. This creates an efficient pedaling platform through your entire pedaling zone, there is an inflection point where the Switch Infinity link moves down, dropping the anti-squat drastically. Riders are typically not pedaling in this zone, so chain forces have less of an effect on the suspension performance.
We custom tune the shock on every Yeti to compliment Switch Infinity's unique characteristics. Unlike other "short-travel" trail bikes the SB115's suspension performs best even when set up with sag numbers (30%) akin to much longer travel bikes. We don't leave it to someone else to make every millimeter of the SB115's suspension travel count.
Decoupling of the chain forces allows the suspension to work more efficiently to absorb impacts making the feel of a Yeti distinct.
DEFT ON THE DOWNS. DESIGNED TO RACE. BUILT TO RALLY.
XC IS NO LONGER A GLORIFIED GRAVEL RACE.
LONGER-TRAVEL SETUP. NO DOWNSIDE.
- SB115 Turq Series Carbon Frame
- Fox Factory 34/130mm
- Fox Factory Dps 190 X 45mm
- Dt Swiss Xm1700 30mm Wheelset
- Sram X01 Eagle Drivetrain
- Sram G2 Rsc Hydraulic Brakes
- Fox Transfer 150mm
|Frame||SB115 TURQ SERIES CARBON FRAME|
|Fork||FOX FACTORY 34/130MM|
|Rear Shock||FOX FACTORY DPS 190 X 45MM|
|Shifters||SRAM X01 EAGLE|
|Derailleur (Rear)||SRAM X01 EAGLE|
|Brakes||SRAM G2 RSC w/ SRAM CENTERLINE 180/SRAM CENTERLINE 180|
|Crankset||SRAM X1 EAGLE 30T 170MM|
|Cassette||SRAM X01 EAGLE 1295 10-52|
|Chain||SRAM GX EAGLE|
|Hub Front||DT SWISS XM1700 30MM|
|Hub Rear||DT SWISS XM1700 30MM|
|Rims||DT SWISS XM1700 30MM|
|Tyres||(F) MAXXIS MINION DHF 2.5 EXO TYRE /// (R) MAXXIS AGGRESSOR 2.3 EXO|
|Handlebar||YETI CARBON 35X780MM|
|Stem||RACE FACE AEFFECT R 35X50|
|Headset||CANE CREEK 40 INTEGRATED|
|Seatpost||FOX TRANSFER 150MM|
|Wheel Size||29 inch|
|Number of Gears||12|
Ready to rideEvery bike from Start Fitness is fully checked & assembled before despatch and will arrive, almost, ready to ride. Each bike is assembled by one of our CyTech accredited mechanics and then packed into one of our custom boxes.
This process has a lead time of 7 working days. Unfortunately during peak times this may be slightly delayed. We will however, aim to despatch your bike as quickly as possible. Minimal assembly, with basic tools, is required before you can ride. Assembly tools are not usually included. Please note: Some bikes are not supplied with pedals. Manufacturers don’t know if you want flat or clipless pedals - rather than send the bike with the wrong type, they leave the choice for you to make.
Making sure you are homeOnce fully checked and boxed, we will contact you to book a delivery date. Our bikes are despatched on a next working day service (excludes weekends & bank holidays) for UK mainland orders, or a two day service to Northern Ireland and outlying Scottish areas. European bike deliveries usually take approximately one week.
Taking DeliveryAny mechanical or cosmetic issues need to be reported to us within one week of the delivery date. If you do not plan on using the bike straight away, we advise that you remove it from the box and check it over ASAP as we cannot be responsible for any reported issues (other than standard warranty issues) later than one week from the date that the bicycle was delivered.
First ServiceAfter a few weeks of riding (we recommend around 6-8 weeks, regardless of how much the bike has been used), a new bike will need a service to make final adjustments and to re-check all nuts and bolts. This is necessary as the bike goes through a ‘bedding in’ phase, after which, final adjustment may be necessary. We recommend that this is carried out by a CyTech qualified mechanic.
It is important to have these checks carried out to prevent any avoidable problems which may not be covered by warranty and to ensure the smooth running of your bicycle. If you’re local to us, we’re able to offer this first service free of charge* at our Newcastle store (NE1 6JE). You’ll just need to call our workshop on 0191 917 3825 to book your service in, and don’t forget to bring your proof of purchase when you drop the bike off with us.
If you’ve had the bike delivered, it will be your responsibility to ensure a first service is carried out at a trusted bike shop local to you, preferably by a Cytech certified mechanic. Start Fitness are unfortunately not able to cover any costs associated with this service if carried out by another store.
*Please note that this complimentary check-over does not include any labour to replace worn parts or to fit new accessories. All bikes should be delivered to us in a clean and serviceable condition, or a £15 cleaning charge will be payable.
Bike ServicingBicycles need to be serviced regularly, as a guideline we would advise on at least one full service per year and/or a standard service twice a year. If the bike is used regularly in adverse conditions, more regular servicing may be required.
Still not sure? Need some advice?
Book a call with one of our experts to get more information on this product.