Brand new for 2021, Merida are using the proven Mahle eBikemotion hub motor system to create a range of 5 new models.
1.5" HEAD TUBE Higher system weights and increased cornering speeds demand precise steering. Our 1 1/2" oversized head tube, combined with a tapered fork, deliver exactly that, giving the rider the confidence to push into the next corner that little bit harder.
GET KITTED UP Our e700C LITE frame comes with multiple fixing points, allowing for fenders, rear rack and a kick stand to be fitted. This makes all three models very adaptable in case you want to turn your sporty e-road bike into a fast commuter or touring bike. The eSPEEDER 400 EQ comes fully kitted out as standard – ready for the daily commuting duties.
GO WIDE Depending on your preferences or the terrain you are going to ride on, you can fit 700c wheels with up to 40 mm tyres, even when fenders are fitted. If you prefer 650B wheels, then up to 47 mm wide off-road biased tyres are no problem.
MAHLE MOTOR AND BATTERY The rear hub MAHLE motor system X35+offers 40 Nm of smooth and drag-free support and is powered by a 250 Wh internal battery. The system is controlled by a one-button iWOC switch which is positioned on the top tube. Different colours of the switch indicate the support as well as the battery level.
WANT TO GO FURTHER? Should the 250 Wh battery not be enough, or you are intending to go for an extra long outing, then you can fit a 250 Wh range extender. The range extender can be attached to one of the bottle cage fixing points and plugs straight into the system for immediate range extension.
WHAT CABLES? All cables are run internally, to give the bike a neat look as well as protect them from moisture and dirt. On our e-road bikes, we go one step further by letting all cables enter the frame through a specific headset cup, making the cockpit super clean and clutter-free.
CARBON FORK All models are equipped with a full carbon tapered fork. Carbon has great vibration absorbing properties in addition to being lightweight, so ride quality is improved. The carbon tapered steerer provides great stiffness to the front end of the bike, delivering precise and confidence-inspiring handling.
eScultura Lightweight Aluminum Frame
Mission CX Carbon Fork
MAHLE X35+ Hub Motor 40Nm
MAHLE B1-C 250Wh Battery
Shimano 105 2x11 Drivetrain
Shimano 105 Hydraulic Disc Brakes
eSCULTURA LITE material: aluminium 700x45C / 700x42C (with fender) / 27,5x47C max. wheelsize 100x9/135x9mm axle standard BSA bottom bracket standard
MISSION CX CF3 material: carbon 700x42C with fender
MERIDA EXPERT CC material: carbon 30.9mm diameter 0mm setback
Number of Gears
MAHLE X35+ Hub Engine 40Nm / MAHLE PAS Sensor
MAHLE B1-C 250Wh w/ MAHLE CHARGER-C 2A charging current charger
Ready to ride
Every bike from Start Fitness is fully checked & assembled before despatch and will arrive, almost, ready to ride. Each bike is assembled by one of our CyTech accredited mechanics and then packed into one of our custom boxes. Minimal assembly, with basic tools, is required before you can ride. Assembly tools are not usually included.
Please note: Some bikes are not supplied with pedals. Manufacturers don’t know if you want flat or clipless pedals, rather than send the bike with the wrong type, they leave the choice for you to make.
This process has a lead time of between 3-5 working days
Unfortunately during peak times this may be slightly delayed. We will however, aim to despatch your bike as quickly as possible.
Making sure you are home
Once fully checked and boxed, we will contact you to book a delivery date. Our bikes are despatched on a next working day service (excludes weekends & bank holidays) for UK mainland orders, or a two day service to Northern Ireland and outlying Scottish areas. European bike deliveries usually take approximately one week.
Any mechanical or cosmetic issues need to be reported to us within one week of the delivery date. If you do not plan on using the bike straight away, we advise that you remove it from the box and check it over ASAP as we cannot be responsible for any reported issues (other than standard warranty issues) later than one week from the date that the bicycle was delivered.
After a few weeks of riding (depending on riding style and conditions), a new bike will need a check-over to make final adjustments and to re-check all nuts and bolts. This is necessary as the bike goes through a ‘bedding in’ phase after which, final adjustment may be necessary. We recommend that this is carried out by a CyTech qualified mechanic. It is important to have these checks carried out to prevent any avoidable problems which may not be covered by warranty and to ensure the smooth running of the bicycle.
We can carry out the first check-over free of charge, at our Newcastle store (NE16JE). If you’ve had the bike delivered, it will be your responsibility to get the bicycle to and from our store for this work to be carried out. This complimentary check-over does not include any labour to replace worn parts or to fit new accessories.
All bikes must be booked in for the first service & must be clean or a £15 cleaning charge will be payable. You can book this by calling 0191 261 4191. Proof of purchase will need to be presented when the bicycle is dropped off for the first check-over.
Bicycles need to be serviced regularly, as a guideline we would advise on at least one full service per year and/or a standard service twice a year. If the bike is used regularly in adverse conditions, more regular servicing may be required.
ASK AN EXPERT
Book a call with one of our experts to get more information on this product.